ACCESSORIES
With over 25 years experience in the capture and transfer of aggressive slurries SOLIDSVAC stock a complete range of high quality suction and discharge hoses along with a range of fittings at very competitive prices. SOLIDSVAC tested and suitable for all applications we would be more than pleased to provide a quote to suit your needs, your application and your budget.
Vacuum & Discharge Hoses
Suction and Discharge hoses are available in 2" (50mm) 3"(75mm) & 4" (100mm) all with a range of Victaulic or QR Fittings.
50mm Suction Wand
Our Stainless Steel Suction Wands are available in 2" (50mm) - 3" (75mm) and 4" (100mm)
SV-Duck Bill Head
Our Duck Bill Head is for large volume spill control, cleaning tank bottoms and most industrial cleanup requirements. Available in both Aluminium and Stainless Steel in 2" (50mm) and 3"(75mm)
SV800 Carousel
The SV800 carousel allows users to drop materials being pumped into skips or other types of containers for transport.
In-line Annular
The in-line annular coupling aerates the product being conveyed which in turn allows for greater lifts or higher loading rates.
2" Strainer (5mm)
This strainer is for slurry's with finer particles up to approximately 5mm.
2" Strainer (20mm)
This strainer is for slurry's with larger particles up to approximately 20mm.
Drop Box
The Drop Box allows for recovered material to be delivered to either bulk bag, skip or conveyor. As the name imes, material flow is halted and gravity takes over.
38mm Vacuum/Spill Wand
The Vacuum/Spill Wand incorporates a combination of both a vacuum and squeegee head, useful for dangerous spills and general cleanup.
Vacuum Head
When used with either the SV20 or SV70 the Vac Head will capture mud, oil, foam, cement grit, etc from concrete, steel, wood floors or roadways. Ideal for Rig Floor clean up or removing mud and silt after flooding along with MV accidents and tanker discharge spills.
Solidsvac Dewatering Box
The Solidsvac Dewatering Box removes particles .5mm and above from ROM slurries pumped to the unit. Solids are dropped to the conveyor or skip and clean fluids exit via a 3" outlet.
Surface Skimmer
The SV-Surface Skimmer allows for the capture of materials floating on the surface of any body of liquid. With an easy to set depth gauge, you can collect only the fluid/material your after.
Float Switch
The SV-Float Switch allows operators to detect liquid levels and provide unmanned control over tank or sumps.
The SV-Float Switch is heavy duty in design, 100% pneumatic and features a simple install and operation.
Level Sensor
The SV-LS Series are compact lightweight controllers that prevent air powered pumps from operating unnecessarily, thus providing reduced pump wear and significant air savings.
Strainer Trainer
The SV-Strainer Trainer is designed to keep pick-up strainers free from clogging by intermittently purging the strainer box with a short burst of liquid or air.